Altronix NetWay8M Guida di Installazione Scaricare il pdf (Pagina 2)

- 2 - NetWay8M/NetWay16M

Overview:

Altronix NetWay8M/NetWay16M Managed Midspans provide power and pass data for PoE compliant cameras/edge de-

vices. Cameras/edge devices may be located up to 100m from the NetWay unit. A NetWayXT/NetWayXTX repeater mod-

ule can be utilized to extend the distance an additional 100m for a total range of up to 200m. A maximum range of 600m

is possible using multiple repeaters, based on camera/device port requirement. NetWay Managed Midspans are capable of

supporting non-PoE compliant fixed and PTZ IP cameras utilizing NetWay1512 or NetWay3012 adapters.

NetWayM Specifications:

Common Specifications:

Installation Instructions:

Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the authorities

having jurisdiction. NetWayM is not intended to be connected to outside plant leads. These products are for indoor use only

and must be installed within the protected premises.

1. Attach mounting brackets to NetWayM unit for rack or wall mount installation (Figs. 7 or 8, pg. 10).

Affix rubber pads to NetWayM for shelf installation (Fig. 9, pg. 10).

2. Secure the unit in a rack or place unit on a shelf as desired.

Note: The following factors should be taken into consideration when installing these rack mount units:

a. The unit is to be installed in a space where the maximum ambient temperature does not exceed 104ºF (40ºC).

b. Take care to ensure there is sufficient air flow around the unit and that obstructions do not impede it.

c. When mounting units in rack, take care to avoid uneven loading which can cause a hazardous condition.

3. Set illuminated master power disconnect circuit breaker to the (OFF) position (Fig. 1g, pg. 3).

4. Plug the grounded AC line cord (included) into the IEC 320 connector of the NetWayM unit (Fig. 1h, pg. 3). Plug unit

into a reliable earth grounded socket. When using multiple units the sum of the individual name plate ratings should

not exceed the supply circuit rating. Do not connect to a receptacle controlled by a switch.

5. Connect structured cables from port marked [IN] on NetWayM to the corresponding inputs of an ethernet switch or

video server (Fig. 1b, pg. 3, Fig. 5, pg. 5).

Note: All cabling and wire must be UL Listed and/or Recognized wire suitable for their application.

6. Connect structured cables from port marked [OUT] on NetWayM to PoE compliant camera/edge devices

(Fig. 1a, pg. 3, Fig. 5, pg. 5).

Note: For UL294 applications the products are to be tested as part of a complete Access Control System and in

accordance with UL Listed Access Control Devices.

Agency Listings:

• UL/CULListedforInformationTechnologyEquipment

(UL 60950-1).

• ULListedforAccessControlSystems(UL294).

• CEapproved.

Power:

• UnitsuppliesPoEoutputvoltage(55V),andupto30W

max. full power per port.

Total power: NetWay8M - 150W,

NetWay16M - 300W.

• IEEE802.3afandIEEE802.3atcompliant(PoEPlus).

• Alloutputcircuitsarepower-limited.

• Shortcircuitprotection.

Functions:

• ProgrammblePoEshutdownforeachport.Utilizedto

reset cameras/edge devices

(see Technical Specifications pg. 5).

• PoEmanualshutdown(For UL 60950-1 applications

only) (see Technical Specifications pg. 5).

• Autodetectionandprotectionoflegacy

non-PoE cameras/edge devices.

Features:

• LANorlaptopconnectionenablesprogrammingof

PoE shutdown and port monitoring.

• Userinterface(Fig. 6, pg. 7).

• Illuminatedmasterpowerdisconnectcircuitbreaker

with manual reset (switch).

• IndividualportstatusLEDs.

• IEC320-3-wiregroundedlinecord(detachable).

• Unitcanberackorshelfmounted.

• 1UrackmountchassisforuseinstandardEIA19”rack.

Accessories:

NetWay1512:

• 15Wadapterfornon-PoEcompliantIPcameras.

(For UL 60950-1 applications only).

NetWay3012:

• 25Wadapterfornon-PoEcompliantIP

fixed or PTZ cameras.

(For UL 60950-1 applications only).

NetWayXT:

• PoErepeatermoduleextendsrange100m

(For UL 60950-1 applications only).

NetWayXTX:

• PoE+repeatermoduleextendsrange100m.

NetWay8M:

• Eight(8)portsofcameras/edgedevicesoverethernet 

(CAT5) cable up to a distance of 100m per port.

• 115VAC60Hz,3amp(NetWay8M).

NetWay16M:

• Sixteen(16)portsofcameras/edgedevicesoverethernet

(CAT5) cable up to a distance of 100m per port.

• 115VAC60Hz,4.9amp(NetWay16M).

1 2 3 4 5 6 7 ... 11 12

Commenti su questo manuale

Nessun commento

Altronix NetWay8M Guida di Installazione Pagina 2

Commenti su questo manuale

Prodotti e manuali riguardandi Server Altronix NetWay8M